Precautions For Daily Maintenance Of Conveyor Belts
Date：2025-05-12 16:17:04 Browse :
2. Timely remove the attachments on the surface of the transmission drum to prevent the uneven force of the joint due to the irregular surface shape of the drum, resulting in bubbling, wire rope twitching, vulcanized joint elongation and other situations that affect the strength of the joint.
3. The vulcanized joint is the weak part of the strength of the conveyor belt. The initial manifestation of the joint seam is cracking of the rubber. Water penetrates into the wire rope through the gap of the core rubber, causing the wire rope to rust, break, twitch, etc. The elongation change of the joint, abnormal surface changes, etc. should be checked regularly, preventive inspections should be carried out, and defective vulcanized joints should be repaired in time.
4. If there are defects such as the edge rubber of the conveyor belt, the covering rubber falls off, and the wire rope is partially exposed, cold bonding or vulcanization hot repair should be carried out in time. According to the local defect of the conveyor belt, choose different repair methods such as cold patching, hot vulcanization, and filling with steel wire rope to keep the surface of the conveyor belt intact.
During the installation or maintenance and replacement of the conveyor belt, we must control the total length of the conveyor belt after bonding. The conveyor belt bonding construction process must be strictly managed, and the construction details must be grasped to ensure the quality of the joint. During the installation or maintenance process, the construction process must be strictly implemented, and no cutting corners or shortening of time is allowed. It is also necessary to strengthen the daily maintenance and management of the conveyor belt to ensure its effective use and extend its service life.
